Table of Contents
Advertisement
Operation
Operating Instructions 512/532 - 04.0 - 08/2016
Adjusting the position of the shank shaper
The position of the shank shaper (3) can be adjusted to suit
different button diameters.
1.
Loosen the screw (4).
2.
Adjust the shank shaper in the Y direction.
3.
Tighten the screw (4).
4.10 Sewing
Operating and function sequence when sewing:
Sewing process
Starting situation
before sewing
Sewing
Interrupting the sewing
process in the middle
of the sewing cycle
Continuing the sewing
process in the middle
of the sewing cycle
Operation / Explanation
Pedal in the rest position. Sewing machine is
at a standstill. Needle raised, clamp raised.
The Ready button LED illuminates.
• Insert the material to be sewn
• Press the pedal forwards to the 1
The clamp lowers.
• Release the pedal.
The clamp raises.
• Position the sewing material.
• Briefly press the pedal fully forwards.
The sewing machine sews at the configured
speed.
Press the Reset button or press the pedal
backwards.
The sewing machine stops. The clamps
remain lowered.
Press the pedal briefly fully forwards or press
the Reset button.
st
position.
33
Advertisement
Table of Contents
