Picture Adjustment - FLIR CB-5222 User And Installation Manual

Configuration and Operation
Caution:
Noise levels can be compromised when using the 2DNR/3DNR functions.
Attention:
Les niveaux de bruits peuvent être compromis avec les fonctions 2DNR/3DNR.
From the Shutter drop-down list, select a suitable shutter speed from 1/12 to 1/10000 sec (PAL) and
1/15 to 1/10000 sec (NTSC), according to the environmental luminance The default setting is 1/150
(PAL) or 1/180 (NTSC). The following table displays the options.
From the Gain drop-down list, set the maximum gain in 3db steps from Off to 54dB. Increasing the
gain lightens dark pictures resulting from low-level lighting. The default setting is 36dB.
Click SET when you finish setting the gain.

Picture Adjustment

Adjustment of some qualities of the video is made possible by selecting Picture Adjustment in the
Camera tab. Brightness, Sharpness, Contrast, Saturation and Hue may all be adjusted via drop-down
menus from this window, as shown below.
80
Manual Mode
Fixed Shutter Speeds
PAL
1/10000
1/3500
1/2500
1/1750
1/1250
1/1000
1/600
1/425
1/300
1/215
1/150
1/120
1/100
1/75
1/50
1/25
1/12
Figure 78: Camera Settings Screen – Picture Adjustment
CB-5222 User and Installation Guide
NTSC
1/10000
1/4000
1/3000
1/2000
1/1500
1/1000
1/725
1/500
1/350
1/250
1/180
1/125
1/100
1/90
1/60
1/30
1/15
April 25, 2017