Figure 63: Partial Restore Screen - FLIR CB-5222 User And Installation Manual

Configuration and Operation
Partial Restore
Click PARTIAL RESTORE to restore the factory default settings of the camera system, but save the
network settings. The system restarts in 30 seconds.
Analytics Restore
Click ANALYTICS RESTORE to reset the analytic firmware.
Note:
Analytics firmware is stored in a separate file than the camera system firmware. To backup and
restore the analytics firmware version, see
Reboot
Click REBOOT to restart the system without changing current settings.
Software Version
The current version of the camera system software is displayed in the Software Version screen.
Note:
To view the analytics firmware version, see
66

Figure 63: Partial Restore Screen

Analytics > Backup &
Figure 64: Software Version Screen
Analytics > Firmware.
CB-5222 User and Installation Guide
Restore.
April 25, 2017