System Interface Cable Connector; Figure 9-1: Ptz/Sr-35X140Ms Interface Cable Connector - FLIR PTZ-35x140MS Installation And Operation Manual

8.3 System Interface Cable Connector

The PTZ-35x140MS and SR-35x140MS use an electrical-mechanical engagement connection
that requires only one integrated cable to interface with the sensor. An optional interface cable
is available. It is 12.2 meters (40 ft) long and is terminated with a MIL-C-26482 Series 1
Connector.
Interface cable connector front view (Male)
Figure 8-4: PTZ/SR-35x140MS Interface Cable Connector
System Interface Cable Pin Designations
Function Pin
Power j
f
g
W
b
h
Z
a
Ethernet D
E
F
G
Drain X
427-0011-00-10 Revision 140
Chassis connector front view (Female
Signal Name Function
Power In + Comms
P3
Power In + (USER)
Power In +
Power In +
Power In -
Power In - Comms
P4
Power In - (MAINT)
Power In -
Rx+ (RJ45 3)
Rx- (RJ45 6)
Tx- (RJ45 2) Video
Tx+ (RJ45 1)
Shield/connector
shell
)
Pin Signal Name
M Tx(+) RS-422 (COM1)
N Rx(+) RS-422
(COM1)
c GND RS-422 (COM1)
P Tx (-) RS-422
(COM1)
R Rx (-) RS-422
(COM1)
U Maintenance COM2
S Maintenance COM2
V Maintenance COM2
A Maintenance COM2
T Maintenance COM2
J Video Out Center
K Video Out Shield
Copyright © FLIR Systems, Inc. 40