Miscellaneous - FLIR CB-5222 User And Installation Manual

Miscellaneous

From the Misc. (Miscellaneous) tab, you can set the TV System and Shutter WDR.
Note:
The selection of Shutter WDR On or Off determines which
TV System Settings
Select the video system setting: 25 fps (PAL) or 30 fps (NTSC). The default TV system is 30 fps
(NTSC). Click SET to confirm the setting.
Note:
After changing TV System settings, the camera restarts automatically. You must re-enter the unit's
IP address again in your browser in order to use the unit with the new settings. The camera restores
to factory defaults and the analytics settings are deleted.
Shutter WDR
The Shutter WDR (Wide Dynamic Range) function, also known as True WDR or multi-exposure WDR,
resolves high contrast or changing light issues and creates a constant video output level. The camera
creates a new image with a wide dynamic range by using a combination of slow- and fast-exposure
shutters and an algorithm to determine the optimal mix of light and dark regions within the scene from
the two shutters.
Figure 83: Shutter WDR On
Shutter WDR is selectable between On or Off:
When On is selected, the image has a wide dynamic range, so that the IP camera can capture
a greater scale of brightness. This is the default setting.
Selecting Off disables this function.
Click SET to confirm the new setting.
April 25, 2017
Figure 82: Misc. Screen
CB-5222 User and Installation Guide
Configuration and Operation
Exposure screen is displayed.
Figure 84: Shutter WDR Off
83