FLIR CB-5222 User And Installation Manual page 99

To perform a solo setup
1. Click the Solo Setup tab. The Solo Setup keypad opens with the following control icons:
Icon
2. On the Solo Setup control keypad, click Start Recording
camera's Field of View.
3. Select a folder where to store the clip. Recording starts when the folder is selected.
4. Walk through various locations across the vertical axis of the camera's Field of View in
order to place ground and height markers and guidelines in the clip.
5. Click Stop Recording
6. Click Step 1: Ground & Height and follow the instructions.
7. Click Browse
8. Use the Play
Solo Setup keypad to explore the clip. The status of the view is displayed on the bottom
left side of the screen.
April 25, 2017
Function Notes
Starts recording and browses to destination folder
Start Recording where the clip will be saved
Stop Recording Stops recording
Browses to the destination folder where clip is stored
Browse and loads the clip
Play/Pause Speed X1/X0
Speed X2, X4, X8, X16. Click to increase or decrease
Fast Forward speed.
Speed -X2, -X4, -X8, -X16. Click to increase or
Rewind decrease speed.
.
to load the clip from the folder where it is saved.
, Pause , Fast Forward
CB-5222 User and Installation Guide
Configuration and Operation
to record a view in the
, and Rewind buttons on the
89