Configuring Ground and Height Settings
If you are not performing a solo setup, do the following:
To configure ground and height settings
1. Click the Step 1: Ground & Height tab. The Step 1: Ground & Height screen opens.
2. Follow the instructions on screen.
3. Refer to the HTML Edition Units User's Guide for detailed instructions on configuring these
settings.
4. Click APPLY when finished or continue to the next step.
April 25, 2017
Figure 90: Analytics > Depth > Step 1: Ground & Height Screen
Figure 91: Analytics > Depth > Step 1: Ground & Height Instructions
CB-5222 User and Installation Guide
Configuration and Operation
91