Viii.2.2.4 Software Versions; Viii.2.2.5 Alarms - Prodys PortaNet User Manual

VIII.2.2.4 Software Versions
VIII.2.2.5 Alarms
From this option it is possible to select the IP address where the SNMP traps will
be sent. An SNMP manager located at this IP address will receive and process
the information according to the SNMP protocol. These SNMP traps will notify
alarm information, that is, an SNMP trap will be sent when an alarm is activated
or deactivated, with the time and type of alarm. For this to happen, alarms have
to be enabled (see chapter VIII.8 Alarms). PortaNet can be fully monitored
though SNMP protocol. It is also possible to notify alarm events via email. The
user can send alarm information to several email addresses at the same time.
PortaNet User Manual 66 of 156