Prodys PortaNet User Manual page 6

X.4.1 Headphone outputs
X.4.1.1 Attenuation when the MIC/LINE level input goes to Talkback or
Program.............................................................................. 128
X.4.1.2 Enable from TB Key ...................................................... 129
X.4.2 Balanced audio outputs.
Operation examples .......................................................... 130
XI.1 Using the TalkBack channel
XI.2 Connecting to an external mixer
XI.3 Stereo operation mode:
Problem-solving guide ....................................................... 136
XII.1 Audio problems
XII.1.1 No Audio on the outputs
XII.1.2 The program line is connected but there is no audio on the outputs136
XII.1.3 There is no audio output at either end
XII.1.4 Audio distortion
XII.2 ISDN communication problems
XII.2.1 Unit cannot make outgoing calls
XII.2.2 Unit cannot receive incoming calls
XII.3 IP communication problems
XII.3.1 Prodys Codec's Web Page cannot be accessed
XII.3.2 When connecting two audiocodecs in unicast, there is no audio at
one end.
XII.3.3 No audio when connecting two audiocodecs using Multicast
XII.3.4 Interruptions to audio when connecting two Prodys Codecs.
Technical specifications ..................................................... 145
Audio Interfaces
Audio Compression
BANDWIDTH (KHz)
IP Protocols and compatibility
Comunication ports
ISDN
LAN port
GPIO port
RS232 port
Power supply.
Weight and dimensions
Connectors ..................................................................... 151
XIV.1 Audio inputs
PortaNet User Manual
127
129
130
132
134
136
136
137
137
137
137
138
138
138
141
142
142
145
146
146
149
149
149
149
149
149
149
150
151
6 of 156