Vii.12.2 Incoming Calls Via Ip - Prodys PortaNet User Manual

those calls that are made to the local number - all other calls are discarded.
Thus, the user can control which calls will be connected on program line (line 1),
and which ones on the coordination line (line 2).
When there is only one number available for both channels,
the first call will be connected on line 1 and the second one
on line 2. Thus, before making connections for establishing
the TalkBack channel, make sure that the program line has
been already connected.
VII.12.2 Incoming calls via IP
Compatibility: PortaNet supports a proprietary IP streaming protocol, only
compatible with Prodys IP audio codecs.
standard algorithms is provided under the 'Streaming Protocol' tab in the
Configuration window of PortaNet web page. A preliminary version of all
protocols defined as 'mandatory' by the EBU group in their N/ACIP (Audio
Contribution Over IP) project is supported. This project defines the standard to
achieve interoperability between audio codecs over IP.
Available compression modes: Line two can only be configured to G722
(encoder and decoder). Line 1 can be configured to any compression mode. The
encoder and the decoder of line 1 can work in different modes.
Automatic answer: The answer mode is always automatic, so the call is
answered automatically.
Incoming call mapping: it is not possible to map the incoming calls to a line.
And the following rules apply:
PortaNet User Manual
In addition, support for industry-
43 of 156