Prodys PortaNet User Manual page 63

normal circumstances the indicator should be in the middle
Green area.
Reboot System: A new option to reset remotely a unit was included in the
SYS configuration menu.
PortaNet external protocol: The PortaNet Software Development Kit
provides a tool to manage the PortaNet units from external applications or
devices different than ProdysControl. In this manner, it is possible to
customize the control of the units and to integrate them in a global
management system.
The protocol is based on which can be managed through two different
communication ports: the LAN port and the RS232 B port. For more
information, please read ProntoNet SDK User's Manual.
IP Codec Mode: There are two different operation modes: SIMPLE and
DOUBLE mode. In SIMPLE mode, the unit will cannot establish two
independent communications via IP. In DOUBLE mode, the unit can establish
two independent communications via IP.
In DOUBLE mode over IP, the following restrictions will be applied:
PortaNet User Manual 63 of 156