Identification - WAGNER PEM-X1 Operating Manual
Powder spray gun
Hide thumbs
Also See for PEM-X1:
- Original operating manual (72 pages) ,
- Translation of the original operating manual (64 pages)
Table of Contents
Advertisement
VERSION 03/2014
OPERATING MANUAL
3
IDENTIFICATION
3.1
EXPLOSION PROTECTION IDENTIFICATION
Gun type:
PEM-X1
Manufacturer:
J. Wagner AG
CH - 9450 Altstätten
II 2 D 2mJ 85 °C
0102
CE:
European Communities
0102:
Number of notifi ed body which issues the recognition of quality
assurance in production
Ex:
Symbol for explosion protection
II:
Device class II
2:
Category 2
D:
Ex-atmosphere dust
2mJ:
Maximum ignition energy 2 mJ
85 °C:
Maximum surface temperature
The EC type examination certifi cate PTB 12 ATEX 5002 can be found in Chapter 14.4.
3.2
PERMISSIBLE DEVICE COMBINATIONS
Incorrect use!
Risk of injury and damage to the device.
The PEM-X1 powder spray gun may only be connected to the control devices listed below:
EPG-Sprint X with the corresponding PI-F1/HiCoat ED-F powder injector
EPG-Sprint with the corresponding PI-F1/HiCoat ED-F powder injector*
EPG S2 with the corresponding PI-F1/HiCoat ED-F powder injector*
* The remote control function of the PEM-X1 spray gun is not available when using these
control units.
Permissible device combinations for the USA and Canada, see Chapter 14.5 "FM Approval".
ORDER NUMBER DOC 2326020
WARNING
Only connect original Wagner devices to the PEM-X1 powder
spray gun.
PEM-X1
11
Hide quick links:
Advertisement
Table of Contents
