Maintenance; Maintenance Staff; Safety Instructions - WAGNER PEM-X1 Operating Manual

VERSION 03/2014
OPERATING MANUAL
8.2

MAINTENANCE

8.2.1

MAINTENANCE STAFF

Maintenance work should be undertaken regularly and carefully by qualifi ed and trained
staff . They should be informed of specifi c hazards during their training.
The following hazards may arise during maintenance work:
Health hazard from inhaling powder lacquer
Use of unsuitable tools and aids
Once the maintenance work is complete, the device must be checked by a qualifi ed person
to ensure a reliable condition.
8.2.2

SAFETY INSTRUCTIONS

Incorrect maintenance/repair!
Danger to life and damage to the device.
Incorrect maintenance/repair!
Risk of injury and damage to the device.
ORDER NUMBER DOC 2326020
DANGER
Repair or replacement of devices or parts of devices are only
allowed to be performed outside the hazard area by qualifi ed
personnel.
Before starting maintenance or other manual work, the high-
voltage must be shut down and locked to prevent it from being
switched back on!
The spray gun must be separated from the high-voltage supply
and compressed air supply before any maintenance work is
started!
DANGER
Have repairs and part replacements carried out only by specially
trained staff or a WAGNER service center.
Before all work on the device and in the event of work
interruptions:
- Switch off the energy/compressed air supply.
- Relieve spray gun and device pressure.
- Secure the spray gun against actuation.
Observe the operating manual and service manuals at all times
when carrying out work.
PEM-X1
36