Assembly Of The Coronastar - WAGNER PEM-X1 Operating Manual

VERSION 03/2014
OPERATING MANUAL
8.9

ASSEMBLY OF THE CORONASTAR

The CoronaStar is a retrofi t set for the spray gun, which helps to achieve a better surface
quality (e.g., reduction of "orange peel").
Danger from electric current!
Risk of injury and damage to the device.
2
±90°
P_01703
ORDER NUMBER DOC 2326020
WARNING
The conversion to the CoronaStar may only be carried out by
trained personnel.
Prior to assembling the CoronaStar, the high-voltage and
powder feed must be switched off and secured against being
inadvertently switched on.
1
B
Procedure:
1. Guide plug-in contact 1 of CoronaStar into drilled
hole B on hook.
2. Attach clip 2 of CoronaStar to housing.
Flexible positioning in a range of ± 90° is possible.
PEM-X1
47