Rinse Fluid; Cleaning Agent; Flow-Count™ Fluorospheres; Immuno-Trol™ Cells And Immuno-Trol Low Cells - Beckman Coulter FP 1000 Manual

Rinse Fluid

Use a non-fluorescent, balanced electrolyte reagent, such as IsoFlow™ sheath fluid, for the
rinse fluid. The rinse fluid is used, in part, to clean the sample probe. Read the container' s
label for more information.

Cleaning Agent

COULTER CLENZ
prevents protein buildup on the sample probe. Read the container' s label for more
information.
Flow-Count™ Fluorospheres
Flow-Count Fluorospheres is a suspension of fluorospheres used to determine absolute
counts on the flow cytometer. See the package insert for additional information.
IMMUNO-TROL
These control materials contain stabilized erythrocytes and leukocytes with a known quantity
of surface antigens. They are used to verify monoclonal antibody performance as well as to
verify the process of sample staining, lysing, and analysis. See the package inserts for
additional information.

Additional Lysing Reagents

®
IOTest 3 Lysing Solution
IOTest 3 Lysing Solution is a 10X concentration of Ammonium Chloride. Dilute 1:10 to create
a working solution before use. For Research Use Only. Not for use in diagnostic procedures.
See the package insert for more information.

VersaLyse Lysing Solution

VersaLyse Lysing Solution is a general-purpose reagent used to lyse erythrocytes. For
Research Use Only. Not for use in diagnostic procedures. See the package insert for more
information.
PN 623112BA
®
cleaning agent cleans and rinses the sample probe. Using it daily
™
Cells and IMMUNO-TROL Low Cells
REAGENTS AND QUALITY CONTROL MATERIALS
1
USE AND FUNCTION
1-3