Table of Contents
Advertisement
2.7
TRAINING CHECKLIST
Use this checklist to train FP 1000 operators. Duplicate, as needed.
Note: Not all items are appropriate for all users. Mark NA for items that are not required for a
specific user.
General
Describe the intended use of the instrument.
B
Demonstrate how to use the Help system on the instrument workstation.
B
Demonstrate how to view and print the operator manuals from the instrument workstation.
B
Demonstrate how to view and print the operator manuals from the Operator Manuals CD-ROM.
B
Describe how to order the optional printed versions of the operator manuals.
B
Instrument Components
Identify and locate the main components of the instrument.
B
Identify the different types of racks.
B
Identify the different types of cassettes and specimen tube adaptors.
B
Describe the cassette bar-code system.
B
Demonstrate how to apply a bar-code label to a cassette.
B
Describe the carousel bar-code system.
B
Identify the FP 1000 carousel (reflective disk on underside).
B
Differentiate between the carousel used for polypropylene tubes and the one used for polystyrene
B
tubes.
Demonstrate how to properly open the carousel drawer and carousel doors.
B
Explain the importance of waiting at least 10 seconds after you turn the FP 1000 power switch off
B
before you turn it back on again.
Daily Procedures
Review the start-up procedures and how to inspect the sample probe for normal and abnormal
B
wear.
Review how to check for network connectivity and system configuration (external order file
B
paths).
Review the shutdown procedures.
B
Review how to store all reagents, controls, and calibrators after use per their package labeling.
B
PN 623112BA
2
INSTALLATION
TRAINING CHECKLIST
2-5
Advertisement
Table of Contents
