Object Description And Parameterization; Fig. 159 Offset Value Per Measuring Range For User Calibration - Beckhoff EL3692 Documentation

Commissioning
Index 80n2 SAI User Data (for Ch.1 (n=0); Ch.2 (n=1)
Index (hex) Name
80n2:0 SAI User Data
80n2:0m Range x 4 wire / 2 wire
(odd) offset
80n2:0m Range x 2/4W gain
(even)
Fig. 159: Offset value per measuring range for user calibration
5.12.2

Object description and parameterization

Introduction
The CoE overview contains objects for different intended applications. The following section describes the
standard objects, followed by the objects that are specific for this terminal.
Parameterization
The terminal is parameterized via the CoE - Online tab [} 89] (double-click on the respec-
tive object) or via the Process Data tab [} 86](allocation of PDOs).
Note
134
Meaning
Maximum subindex
one offset value per measuring range for user calibra-
tion (see fig. below)
One gain value per measuring range for user calibra-
tion
0x10000 corresponds to 1
Version: 2.1
Data type Flags Default
UINT8 RO 0x24 (36
UINT32 RW 0x00000000
(0
dec
UINT32 RW 0x10000
(65536
)
dec
)
)
dec
EL3692