Beckhoff EL3692 Documentation page 114

Commissioning
Name
Status → Underrange
Status → Overrange
Status → Extended
Range
Status → Data invalid
Status → Data invalid
Status → Autorange
disabled
Status → Error
Status → Steady state
Status → TxPDO State
Status → TxPDO Toggle The TxPDO toggle is toggled by the slave when
Value
Table 2: Process data 0x1A00
Example Program [} 129]: Decomposition of WORDS into bits.
SAI Inputs 0x1A01 (0x1A04)
This PDO contains information on the selected measuring mode and the current range. The two values are
also available within a settings WORD.
Name Explanation
Mode Current measuring mode:
0: 4-wire measurement
1: 4-wire measurement, single-shot mode
2: 2-wire measurement
3: 4-wire measurement, single-shot mode
Range Current measuring range:
-1: 10 mΩ - 100 mΩ
0: 100 mΩ - 1 Ω
1: 1 Ω - 10 Ω
2: 10 Ω - 100 Ω
3: 100 Ω - 1 kΩ
4: 1 kΩ - 10 kΩ
5: 10 kΩ - 100 kΩ
6: 100 kΩ - 1 MΩ
7: 1 MΩ - 10 MΩ
Table 3: Process data 0x1A01
SAI Inputs 0x1A02 (0x1A05)
This PDO contains the current measured value as REAL value. The format matches the REAL format from
the TwinCAT PLC Control.
The format matches the REAL format of IEC 61131-3, which in turn is based on the REAL format of IEC 559.
A REAL number (single precision) is defined as follows (See also Beckhoff InfoSys: TwinCAT PLC Control:
standard data types).
114
Explanation
Value below measuring range.
Measuring range exceeded.
Extended measuring range is used.
Input data are invalid.
No valid range selected.
The Autorange function is disabled.
The error bit is set if the value is invalid (wire
breakage, overrange, underrange)
If the last four values are no more than x / 1024 of
end value apart, the "Steady state" bit is set to
TRUE
Validity of the data of the associated TxPDO (0 =
valid, 1 = invalid).
the data of the associated TxPDO is updated.
Current measured value as INT32, measuring
range end = 0x7F FF FF (standard)
Version: 2.1
Position, size
0x6000:01, 1 bit SW.0
0x6000:02, 1 bit SW.1
0x6000:03, 1 bit SW.2
0x6000:04, 1 bit SW.3
0x6000:05, 1 bit SW.4
0x6000:06, 1 bit SW.5
0x6000:07, 1 bit SW.6
0x6000:09, 1 bit SW.8
0x6000:0F, 1 bit SW.14
0x6000:10, 1 bit SW.15
0x6000:11, 4
bytes
Position, size
0x6001:05, 4 bit
0x6001:09, 1 byte
Bit in status
WORD
-
EL3692