Fig. 136 El3692 Representation In The Twincat System Manager - Beckhoff EL3692 Documentation

Fig. 136: EL3692 representation in the TwinCAT System Manager
• The EL3692 provides the following outputs for each channel:
◦ SAI Inputs: current status
◦ SAI Inputs: current measured value 32 bit integer, measuring range-dependent
◦ SAI Range:: current range (automatic measuring range selection)
◦ SAI Inputs Real: current measured value 32 bit PLC fixed-point float, measuring range-
independent, scaled representation
Please note the information relating to the process data [} 111].
5. for 2-wire measurement: In CoE entry x80n0:0D set the mode to 2 (n stands for the channel: 0 = channel
1, 1 = channel 2).
If necessary the EL3692 can be reset to the factory settings via a CoE reset [} 156].
Measured value display
The EL3692 can output the current channel-based measured value depending on the PDO
option "Predefined PDO assignment" in 2 different ways. As "fixpoint" and "float". See fol-
Note
lowing explanation:
EL3692 Version: 2.1
Commissioning
105