Fig. 150 Find Mac Address; Fig. 151 Searching The Ethernet Adapter - Beckhoff EL3692 Documentation

Commissioning
After opening the .tsm file with the System Manager the EtherCAT master must be notified of the current
MAC address. Click the "Search..." button:
Fig. 150: Find MAC address
Procedure for starting the program
• After clicking the Download button, save the zip file locally on your hard disk, and unzip the *.TSM
(configuration) and the *.PRO (PLC program) files into a temporary working folder.
• Run the *.TSM file and the *.PRO file; the TwinCAT System Manager and TwinCAT PLC will open.
• Connect the hardware in accordance with fig. Connection for sample program and connect the
Ethernet adapter of your PC to the EtherCAT coupler (further information on this can be found in the
corresponding coupler manuals)
• Select the local Ethernet adapter (with real-time driver, if applicable) under System configuration, I/O
configuration, I/O devices, Device (EtherCAT); then on the "Adapter" tab choose "Search...", select the
appropriate adapter and confirm (see Fig. Searching the Ethernet adapter + Selection and confirmation
of the Ethernet adapter).
Fig. 151: Searching the Ethernet adapter
130 Version: 2.1 EL3692