Table of Contents
Advertisement
Check the function and ease of running of
the quick release axles of the drive wheels
and caster forks.
If you should discover any problems
during these checks, please immediately
contact your rehabilitation specialist dealer or
PRO ACTIV. Service and repair work on the
product may only be carried out by your
rehabilitation specialist dealer or PRO ACTIV.
In addition to these maintenance tasks/checks
by the user, PRO ACTIV has prescribed
maintenance tasks to be carried out by the
rehabilitation specialist dealer or
PRO ACTIV for safe operation of the product
and to minimise the risk to the user or third-
parties.
The initial inspection is performed six weeks
after delivery. The maintenance schedule can
be found in the inspection lists in chapter 40.
Subsequent inspections are then always
performed a year after the last inspection. The
maintenance schedule can be found in the
inspection lists in chapter 40.
After extreme stresses, such as during
holidays where the product was exposed to
sand, sea water or snow, an additional deep
clean and inspection by your rehabilitation
specialist retailer is recommended.
To maintain the operating licence and the
warranty validity, the performance of the
maintenance tasks must be documented. Any
faults identified during maintenance work must
be rectified and documented as such before
further use of the product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the
maintenance schedule.
59
Operating instructions SPEEDY F4 & F2
32.3 Proof of maintenance
To provide proof of the maintenance, you can
use the inspection lists in chapter 40. The
inspection lists are also available as pdf files
which can be filled in within the download area
of
www.proactiv-gmbh.com
"more documents >>". In any event, keep all
receipts/service reports as a means of proof,
and get any service work which has not been
carried out by the manufacturer documented.
Please bring these operating
instructions/the present service booklet to
every service.
33 Disposal & Recycling
At the end of the service life, the product can
be disposed of by PRO ACTIV or your
rehabilitation specialist dealer in a proper,
environmentally-friendly manner.
The disposal or recycling must be carried out
by a waste disposal company or a municipal
waste disposal centre.
Special guidelines may apply on-location with
regard to the disposal or recycling. These must
be clarified and considered when disposing
(this may also include the cleaning or
disinfection of the product before the disposal).
In the following text, you will find a description
of the materials for the disposal and recycling
of the product and its packaging:
Aluminium: Frame, rims, caster forks, brakes,
back cross-bar, side sections, clothes guard,
anti-tipping protection, armrest frame, footrest,
footplate, push handles
Steel: Fixing points, quick-release/screwed
axle, anti-tipping supports, brakes, screws,
nuts
Plastic: Handles, quick release levers, tube
plugs, caster wheels, armrest padding, tyres,
footplate, side sections, brake lever, anti-
tipping wheels, bags for packing
Synthetic fibres and foam: Padding, covers
Cardboard/paper: Packaging
under the link
Advertisement
Table of Contents
