Table of Contents
Advertisement
HUSK-E usage instructions
PRO ACTIV for safe operation of the product
and to minimise the risk to the user or third-
parties.
The initial inspection is performed after running
200 kilometres or 5 months after delivery. The
maintenance schedule can be found in the
inspection lists in chapter 33.
Subsequent inspections are then always
performed after 1,000 kilometres running or a
period of 1 year after the last inspection
(whichever comes first). The maintenance
schedule can be found in the inspection lists in
chapter 33.
After extreme stresses, such as during
holidays where the product was exposed to
sand, sea water or snow, an additional deep
clean and inspection by your rehabilitation
specialist dealer is recommended.
To maintain the warranty validity, the
performance of the maintenance tasks must be
documented. Any faults identified during
maintenance work must be rectified and
documented as such before further use of the
product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the
maintenance schedule.
25.3 Proof of maintenance
To provide proof of the maintenance, you can
use the inspection lists in chapter 33. In any
event, keep all receipts/service reports as a
means of proof, and get any service work
which has not been carried out by the
manufacturer documented.
Please bring these usage instructions / the
present service booklet to every
maintenance session.
26 Disposal and recycling
At the end of the service life, the product can
be disposed of by PRO ACTIV or your
rehabilitation specialist dealer in a proper,
environmentally-friendly manner.
The disposal or recycling must be carried out
by a waste disposal company or a municipal
waste disposal centre.
Special guidelines may apply on-location with
regard to the disposal or recycling. These must
be clarified and considered when disposing
(this may also include the cleaning or
disinfection of the product before the disposal).
In addition, the special provisions of the local
regulations regarding the disposal of the drive
system and the rechargeable batteries must be
observed.
In the following text, you will find a description
of the materials for the disposal and recycling
of the product and its packaging:
Aluminium: Frame, rim
Steel: Fastening points, screws, nuts
Plastic: Handles, tyres, bags for packing,
rechargeable battery housing
Copper: Cable and electrical components in
the drive system
Lithium: Rechargeable battery
Cardboard/paper: Packaging
27 Re-use
If your product has been provided to you by
your funding provider and you no longer
require it, you should report this fact to your
health insurance company or your
rehabilitation specialist dealer. Your product
can then be simply and economically re-used.
Before any re-use, a safety check must be
carried out on the product by PRO ACTIV. In
addition to the instructions contained in chapter
24 (Cleaning and care), a thorough cleaning of
the grips, all controls as well as the
rechargeable battery housing must be carried
out.
27
Advertisement
Table of Contents
