Table of Contents
Advertisement
Operating instructions SPEEDY F4 & F2
freight company, for any damage which has
occurred in transit. If you are of the opinion that
damage has occurred during transit, please do
the following:
1. Record a statement of the facts – the
freight company is required to do so.
2. Preparation of a declaration of assignment,
you assign all claims from this damage to
the supplier.
3. Return the shipping note, the statement of
facts and the declaration of assignment to
PRO ACTIV.
Failing to observe this instruction, or reporting
damage after acceptance, means that the
damage cannot be recognised.
5
Introduction
Before starting your journey, familiarise
yourself with these operating instructions
paying particular attention to the safety
information and hazard warnings contained
within them.
Allow your therapists and doctors to
advise you, your carers and assistants, on how
to use the product and what you are safe to do
with the product based on your current ability.
Clarify with them as well which wheelchair
techniques you can learn on the basis of your
ability. Under no circumstances should you do
anything with or in the product which you have
not learnt to and have not mastered.
You, your carers and assistants should
also seek advice from your therapists and
doctors as well as the rehabilitation specialist
dealer about the use and settings of your
product as well as all the safety accessories
available (e.g. anti-tipping supports and waist-
belt). It is then vital that the advice from
doctors, therapists and the rehabilitation
specialist dealer should be followed.
Overestimating your own ability or
underestimating dangerous situations and
actions with the product can result in serious
consequences for you and other people.
If you are not sure how to handle the
product or if technical faults occur, please
contact your rehabilitation specialist dealer or
PRO ACTIV before using it.
Make sure that when combining your
product with equipment made by other
manufacturers (e.g. seat cushion, drive
devices, etc.) that the serviceability of the
individual components and the unit made up of
them is ensured. You can get information on
the suitability of a combination from the
manufacturer of the third-party components or
from your rehabilitation specialist retailer.
6
Intended purpose
Using the product as intended is essentially
based on replacing the walking ability of a
person who has difficulty walking or cannot
walk on a paved path by driving with the
wheelchair as far as is technically feasible. In a
figurative sense, "walking" means walking
speed when using a wheelchair.
7
Acceptable usage and operating
conditions/places of use
Only use the product on paved surfaces. Avoid
driving on unpaved or loose surfaces (e.g. on
loose gravel, in sand, mud, snow, ice or
through deep puddles of water), as this may
result in incalculable risks.
The maximum permitted load of the product in
its standard design is a 120 kg payload.
Individual customisation can be made to
accommodate a higher load; this will be
indicated on the ratings plate. Please ensure
that the load limit indicated on the ratings plate
is not exceeded, even when transporting
objects and carrying out strength exercises in
the product.
6
Advertisement
Table of Contents
