Table of Contents
Advertisement
Operating instructions SPEEDY F4 & F2
27 Push handles
27.1 Back tube with integrated handles
Figure 155: Back tube with integrated handles
With these push handles, there is no option for
adjustment and no possibility to remove the
handle.
27.2 Aluminium push handles fixed in
back tube
Figure 156: Aluminium push handles fixed in back
tube
It is not possible to adjust these push handles.
To remove the push handles, undo the M6
fixing screws (AF 4 mm) with washer on both
sides. Then the push handle can be removed
from the back tube.
M6 fixing screw
with washer
To install the push handles, place these in the
back tube and insert the M6 fixing screws (AF
4 mm) (with washers) into the each of the
holes of the back tube and push handle.
Tighten the M6 fixing screws (AF 4 mm) to
7 Nm torque and secure them with thread lock
fluid.
27.3 Push handles, horizontally
screwed in back tube
Figure 157: Push handles, horizontally screwed in
back tube
It is not possible to adjust these push handles.
To remove the push handles, turn these
counter-clockwise out of the back tube.
Turning out
Figure 158: Screw the push handle horizontally out
of the back tube
To install the push handle, turn it into the back
tube clockwise and tighten it to a maximum
hand tightness.
54
Advertisement
Table of Contents
