Table of Contents
Advertisement
Subsequent inspection: One year later after the last inspection or earlier following
particular loading
Check all screws/fastening elements are firmly seated
Clean and oil/grease all pivot points, quick release axles
and bearings
Visual inspection of the frame and attachments for crack
formation, deformation, etc.
Functional/safety check of push handles
Functional/safety check of braking system
Functional/safety check of anti-tipping supports
Functional/safety check of the seat and back system
Functional/safety check of drive wheels
Check wheel tracking and drive wheel bearing are firmly
seated (tightening torque 70 Nm)
Functional/safety check of caster wheels
Checking the caster wheel axle for secure seat (torque 7
Nm) and the correct adjustment of the caster wheel fork
axle (with adjustable caster wheel bearing blocks)
Functional/safety check of footrests
Test drive/functional test
OK / carried out = OK | not OK = not OK | resolved = the fault was corrected
Comments:
Stamp:
Date / Signature
69
Operating instructions SPEEDY F4 & F2
OK /
carried out
not OK
resolved
Advertisement
Table of Contents
