Table of Contents
Advertisement
Operating instructions SPEEDY F1
After extreme loads, an additional thorough
cleaning and inspection are recommended at
your rehabilitation specialist dealer for safety
reasons.
To maintain the operating licence and the
warranty validity, the performance of the
maintenance tasks must be documented. Any
faults identified during maintenance work must
be rectified and documented as such before
further use of the product.
Even if your product does not show any signs
of wear, damage or malfunctions, the regular
safety-related checks on your product must be
carried out in accordance with the
maintenance schedule.
29.3 Proof of maintenance
To provide proof of the maintenance, you can
use the inspection lists in chapter 37. The
inspection lists are also available as pdf files
which can be filled in within the download area
of
www.proactiv-gmbh.com
"more documents
". In any event, keep all
>>
receipts/service reports as a means of proof,
and get any service work which has not been
carried out by the manufacturer documented.
Please bring these operating
instructions/the present service booklet to
every service.
30 Disposal & Recycling
At the end of the service life, the product can
be disposed of by PRO ACTIV or your
rehabilitation specialist dealer in a proper,
environmentally-friendly manner.
The disposal or recycling must be carried out
by a waste disposal company or a municipal
waste disposal centre.
Special guidelines may apply on-location with
regard to the disposal or recycling. These must
be clarified and considered when disposing
(this may also include the cleaning or
disinfection of the product before the disposal).
under the link
In the following text, you will find a description
of the materials for the disposal and recycling
of the product and its packaging:
Aluminium: Frame, rims, caster wheel forks,
back cross brace, side parts, anti-tipping
supports, foot supports, footplate
Steel: Fixing points, quick-release/screw-on
axles, anti-tipping supports, screws, nuts
Plastic: Quick release levers, tube plugs,
caster wheels, tyres, footplate, side parts, anti-
tipping support wheels, bags for packaging
Synthetic fibres and foam: Padding, covers
Cardboard/paper: Packaging
31 Re-use
If your product has been provided to you by
your funding provider and you no longer
require it, you should report this fact to your
health insurance company or your
rehabilitation specialist dealer. Your product
can then be simply and economically re-used.
Before any re-use, a safety check must be
carried out on the product by PRO ACTIV. In
addition to the instructions contained in
chapter 28 (Cleaning and care), a thorough
cleaning of all controls must be carried out
before using it again.
Before the product can be reused, it must be
prepared with care. A disinfection agent must
be sprayed onto all surfaces that the user may
make contact with. For this purpose, a liquid
disinfection agent based on alcohol must be
used for the quick residue-free disinfection
(e.g. Exporit 4712). Please observe the
manufacturers instructions for use for the
disinfection agent that you use. In general, a
complete disinfection cannot be guaranteed on
the seams. We therefore recommend that you
dispose of the seat and rear padding.
These preparations will be performed by
PRO ACTIV as part of the safety inspection.
This safety-related check must be initiated by
the funding provider.
34
Advertisement
Table of Contents
