Table of Contents
Advertisement
Operating instructions SPEEDY F4 & F2
Pull the rear loop part
to the left
Figure 16: Then re-apply the tensioning loops back
on the back system
Figure 17: Tensioning loops applied slightly to the
back system
Then re-mount the back upholstery using the
fleece hook-and-loop straps.
If the belt should have mistakenly been
threaded out during the adjustment, see the
following figures for threading the belt in
correctly:
Figure 18: Step 1: Threading in the belt
Figure 19: Step 2: Threading in the belt
Figure 20: Step 3: Pulling the belt through
Figure 21: Step 4: Simple threading in of the belt
through the tensioning loops
The belts must always be threaded
through the tensioning loops twice, otherwise
the belts will slacken when using the product,
and with heavy loads, the middle web of the
tensioning loops will sag strongly.
18
Advertisement
Table of Contents
