Table of Contents
Advertisement
Other possible
position
Figure 134: Positions of the braking bolt
26.2 Knee lever brake with pull cable
operation (SPEEDY F2)
Figure 135: Knee lever brake with pull cable
operation, control unit
Figure 136: Knee lever brake with pull cable
operation, braking unit
49
Standard position
of the braking bolt
Operating instructions SPEEDY F4 & F2
26.2.1 Opening and closing the brake
The brake is closed by pushing the brake
lever forwards and downwards. In the closed
position, the braking bolt pushes the tyre in by
approx. 4 mm (at the specified air pressure in
the tyre).
Brake lever
Figure 137: Brake opened, closing done by pushing
the brake lever forwards and downwards
Figure 138: Brake closed, brake bolt presses into
the tyre by approx. 4 mm
Please note that the knee lever brake with
pull cable operation is a parking brake which
may only be applied when the product is at a
standstill. This is not a service brake which is
suitable for reducing speed.
To open the brake, pull the brake lever back
up and rearwards again. In the open position,
the distance between the braking bolt and the
tyre is approx. 3 to maximum of 4 mm.
Close brake
Advertisement
Table of Contents
