List Of Settings - Riso ComColor FW5230 User Manual

List of Settings

The items described below can be set when the
multifunction finisher is connected.
Printer Driver
Setting
Description
item
[Finishing] tab
Offset You can stack each set of
Output printed documents slightly
apart from one another
when printing multiple
copies.
Staple Select the stapling
position.
Punch Select the punching
method.
Fold Select this when folding
paper in two.
Booklet Specify the type of booklet
Binding printing.
Output Specify the output tray.
Tray
Output Select this to switch the
Tray Relay output tray automatically
when the tray is full.
[Advanced] tab
Program Specify this when the
number of required copies
varies by group (such as
corporate division or
class).
Offset You can stack each set of
Output printed documents slightly
(Program) apart from one another to
create separation.
• When [Staple], [Punch], and other functions are
grayed out in the [Finishing] tab, make sure that
[Printer Configuration] in the [Environment] tab
on the properties screen has been configured
correctly. (p. 3-28 "Printer Configuration")
Copy Mode
Setting
item
Booklet
Binding
([Booklet])
See
Separating
Books
([Booklet])
p. 8-10
Program
p. 8-10
p. 8-13
Offset
Output
p. 8-13
([Program])
p. 8-15
Separation
p. 8-17
Offset Output
([Separation])
p. 8-17
Staple /
Punch
Fold
p. 3-26
Output
Tray
Face Up/
p. 8-17
Down
Output
Tray Relay
Multifunction Finisher
Description
Specify the imposition and
paper folding when
creating a booklet.
Printing paper is folded in
two and bound in the
middle with staples.
Select whether a saddle
stitch binding or a side
stitched binding when a
booklet is printed with
separated outputs.
Specify this when the
number of required copies
varies by group (such as
corporate division or
class).
You can stack each set of
printed documents slightly
apart from one another to
create separation.
Specify where to insert slip
sheets between printouts.
You can stack each set of
printed documents slightly
apart from one another to
create separation.
Specify the stapling and
punching settings.
Select this when folding
paper in two.
Specify the output tray.
Specify whether to output
printouts face-up or face-
down to the tray.
Select this to switch the
output tray automatically
when the tray is full.
ComColor FW Series User's Guide
See
p. 1-14
p. 8-20
p. 8-20
p. 1-20
p. 8-21
p. 1-22
p. 8-17
p. 8-18
p. 8-19
p. 8-21
p. 8-21
8
p. 8-21
8-9