List Of Settings; Printer Driver Settings - Riso ComColor FW5230 User Manual

List of Settings

The items described below can be set when the
face down finisher is connected.
Printer Driver
Setting
Description
item
[Finishing] tab
Offset You can stack each set of
Output printed documents slightly
apart from one another
when printing multiple
copies.
Staple Select the stapling
position.
[Advanced] tab
Program Specify this when the
number of required copies
varies by group (such as
corporate division or
class).
Offset You can stack each set of
Output printed documents slightly
(Program) apart from one another to
create separation.
• When [Staple] is grayed out in the [Finishing]
tab, make sure that [Printer Configuration] in the
[Environment] tab on the properties screen has
been configured correctly. (p. 3-28 "Printer
Configuration")
Copy Mode
Setting
item
Program
See Offset
Output
([Program])
p. 8-3
Separation
Offset Output
([Separation])
p. 8-4
Staple
p. 3-26

Printer Driver Settings

p. 8-6
Offset Output
Stack each set of printed documents slightly apart
from one another when printing multiple copies.
• When [Program] is configured, [Offset Output] is
[OFF]. (p. 3-26 "Program")
• This setting is not available for paper sizes that
cannot be output to the face down finisher.
• When using the face down finisher, you cannot
use this setting with stapling.
• When [Mixed Size Original] is configured,
[Offset Output] is [OFF]. (p. 3-11 "Mixed Size
Original")
[OFF]
Offset output is not performed.
[Between Sorts]
Each set of printed documents specified in [Sort] is
stacked slightly apart from one another.
[Between Jobs]
Each finished print job is stacked slightly apart from one
another.
Face Down Finisher
Description
Specify this when the
number of required copies
varies by group (such as
corporate division or
class).
You can stack each set of
printed documents slightly
apart from one another to
create separation.
Specify where to insert slip
sheets between printouts.
You can stack each set of
printed documents slightly
apart from one another to
create separation.
Configure the staple
settings.
ComColor FW Series User's Guide
See
p. 1-20
p. 8-7
p. 1-22
p. 8-6
p. 8-6
8
8-3