Canceling Copying; Using The Numeric Keys - Riso ComColor FW5230 User Manual

●
4 Specify the number of copies

using the numeric keys.

Enter the desired number of copies, up to a
maximum of 9,999.
●
5 Press the [Start] key.
The [Copying] screen is displayed, and copying of
the original starts. The current status is displayed
on the screen.
• When you select [Slow Printing], the printing speed will
slow down and the operating sound for the job in
progress will be quieter.
• If another job is being printed, a message is displayed
and the copying starts after finishing the ongoing job.
• When you need to copy a document while a job
is being printed, press the [Interrupt] key to
pause the current job, and start another copy
job.
■ When using the platen glass to scan
an original with several pages
After scanning one page of an original, a screen with a
message asking whether there is another page to be
scanned appears.
When there is another page to be scanned, load the next
page and touch [Scan]. After all pages of the original are
scanned, touch [Scanned].
Loading the Next Copy Job
During copying, once scanning of the original has
been completed, you can begin scanning the next
original.
1
Press [Close] on the [Copying]
screen.
2
Load the next original and press the
[Start] key.
A message appears, and the original is copied as
the next job.
Overview of Copy Operations

Canceling Copying

1
Press the [Stop] key.
The [Suspending] screen is displayed.
2
Touch [Cancel].
The [Confirm] screen is displayed.
3
Touch [OK].
Copying is canceled.
4
Touch [Close].
Changing the Settings During
Copying
1
Press the [Stop] key.
The [Suspending] screen is displayed.
2
Touch [Change Setting].
The [Change Setting] screen is displayed.
ComColor FW Series User's Guide
1
1-3