Installing To Os X - Riso ComColor FW5230 User Manual

Installing to OS X

1
Load the included DVD-ROM in the
computer's DVD-ROM drive.
Double-click the installation package file on the
DVD-ROM.
2
Click [Continue].
3
Click [Install].
4
Follow the on-screen instructions to
configure the settings.
On the authentication screen, enter values for
[Name] and [Password], and click [Install Software].
• Contact your administrator for [Name] and
[Password] information.
5
Click [Close].
6
Remove the DVD-ROM from the
computer.
• Keep the DVD-ROM in a safe place for
future reference.
7
Add a printer.
1 Open the Mac OS X startup volume, and
open [Applications] - [System Preferences].
2 Click [Print & Scan] or [Printers &
Scanners].
3 Click the [+] button.
8
Configure the queue.
On the [Add] screen, click [IP] and enter the IP
address and queue.
Queue: Enter "lp" in lower case characters for the
queue.
Uninstalling From OS X
1
Open the Mac OS X startup volume,
and open [Applications] - [System
Preferences].
2
Click [Print & Scan] or [Printers &
Scanners].
3
Select the printer you want to delete,
and click the [-] button.
• Delete the following folder and file from the Mac
OS X startup volume as needed.
• The [RISO] folder in [Library] - [Printers].
• The "RSFW **** .ppd" file in [Library] - [Printers] -
[PPDs] - [Contents] - [Resources].
ComColor FW Series User's Guide
PostScript Kit
8
8-27