HID FARGO C50 User Manual page 24

Printer Preferences Page 3-6
3.2.1 Write Only
Select this option to use rewritable cards. The default setup is for the printer to first erase the entire
card then write new information on the card. There is no option to select specific areas to erase. To
print or erase a section, use the Overlay/Print Area tab. Select the specific area in the same manner
as a print job with a color ribbon.
To erase many cards, use the FARGO Workbench Re-Writable Card Eraser option. It does not print,
It only erases.
Note: No ribbon is used with rewritable cards. Do not load a ribbon into the printer when using this
process. Printing on a rewritable card with a ribbon will ruin the card.
PLT-01277, Version: 1.2 November 2014