Reproducing - Teac GX-1 Instruction Manual

Data recorded in the internal device — memory or removable medium — can be repro-
duced in waveform display.
1.
If the PLAY tab on the left of the monitor area is active,
click the NORMAL tab.
2.
From the File menu, choose Open.
3.
In the dialog that appears, select a device or a folder con-
taining the data file you want to reproduce.
4.
Select the data file (.dat file) you want to reproduce.
5.
Click OK.
The PLAY tab is activated and the window below appears.
Click here to return to recording
mode from reproducing.
Displays the list of the files
recorded in the device selected
for reproduction. Above the
list, the slot configuration at
recording is displayed.

Reproducing

Click to view output waveforms
from output amplifiers.
(Max. sampling: 100 kHz)
To locate the reproducing point, drag the slider
and click Search. After "Search complete" is
shown, click the start button. The data length
(minute: second) is shown in the box on the left
of the Search button.
The data recorded in a medium on the PC can-
not be reproduced.
With the optional analog output amplifier, you
can reproduce the recorded data as analog sig-
nal.
3
When data in a removable medium is selected,
it takes some time until the display changes.
Operations at this display can be done in the
same way as recording monitor. The IDs are
not displayed.
Do not change the channels to display during
reproduction. Do not switch from waveform to
bar graph during reproduction.
Select recorded channel, not analog out-
put channel.
Use of toolbar for reproducing
Basic Operations
4
5
Back to the head of the previous
ID (effective during stop)
Stop Start
Skip to the next ID
(effective during stop)
3-15