Table of Contents
Advertisement
About Auto Range
You can automatically optimize the input ranges for analog type amplifiers. The
input ranges of all channels of the analog type amplifiers are optimized at a time.
• You cannot use this function when the sampling frequency (the higher frequency
in multi-sampling) is higher than 50 kHz or when you sweep the external sampling
clock.
1. From the Setup menu, choose Params and click Auto Range.
The box below appears.
2. Click Start.
The message in the box changes to "Calculate range...".
3. Input the actual signals.
4. After the signals are finished, click Stop.
5. Click Close.
The input ranges changed by this function are displayed in red in the Parameters
window.
Explanations of Menus
3-39
Advertisement
Table of Contents
