Table of Contents
Advertisement
Explanations of Menus
Status Bar
Displays or hides the status bar at the bottom of the window.
Wave Monitor
FFT Monitor
Bar Graph
Output Monitor
Displays the waveforms of reproduced output from the output amplifiers: AR-GXDIO or
AR-GXAO. Selectable only in the reproduction mode: when the PLAY tab is active. The
maximum sampling frequency is 100 kHz.
Control Panel
Displays the Control Panel. The Control Panel enables you to control recording/reproducing
and to monitor activities.
Number of ID
Current time
During repro-
ducing, the
date and time
when the
recording was
made.
3-36
: Switches the display to the Waveform Display window.
: Switches the display to the FFT window.
: Switches the display to the Bar Graph window.
Event number
Monitored channel
Stop
Rec Standby Start
Skip to the next ID (effective during stop of reproducing)
Back to the head of the previous ID
(effective during stop of reproducing)
Activity display: Blinks during Rec Standby.
Elapsed recording time
Event
A lighted segment rotates
during recording, reproducing,
and pause of reproducing.
Rec Standby button:
Rec Standby, Rec Pause
Stop button:
In recording:
Rec Stop
In reproducing: click once: Rep Pause
click twice: Rep Stop
You can also use the function keys on the
keyboard:
Stop:
F5 key
Rec Standby:
F6 key
Start:
F7 key
Event:
F8 key
Advertisement
Table of Contents
