The Waveform Display Window - Teac GX-1 Instruction Manual

The Waveform Display Window

The Waveform Display window is composed of the components described below.
After data is recorded in memory, this window displays the data in memory. You can
use the cursor to read values, enlarge parts of a waveform, and scroll through the dis-
play.
To switch from the FFT window or the Bar Graph window to the Waveform Display
window, from the View menu choose Wave Monitor, or click the
Click here to add
or cut a page.
Click here to turn to another
page. Channels can be selected
for each page. Fleeting noise
may appear on turning the pages.
Dragging the rectangle scrolls
through the display. (In repro-
ducing, only when stopped) The
range is all the data. The left
and right arrow buttons scroll
through one second units.
button.
Dragging the cursor displays
the values of that position in
the left of the graph.
After using the mouse to specify
the area, from the Edit menu
choose Zoom to enlarge the
area. (Effective when Time
Scale is 50 ms to 1 s.)
Dragging the rectangle scrolls
through the display. (In reproducing,
only when stopped) The range is
one second. The left and right arrow
buttons scroll through 1/10 of the
units in Time Scale.
Basic Operations
It may be some time before the waveform
appears after recording stop.
Decimated data is displayed when the sampling
frequency is 200 kHz.
Clicking an event number in the list
displays the data of that position in
the far left of the window.
Selects a channel to out-
put from the MON OUT
connector. Do not
change during recording.
Selects the scale of the time
axis. The possible time scale
settings depend on the sam-
pling frequencies. (See the
next page.)
3-11