Teac GX-1 Instruction Manual page 64

Wave Panel
Displays the panel to show the digital value of the waveform. Selectable only
when the waveform display is selected. The value at the left end—not at the cur-
sor—of the waveform of the specified channel is displayed.
Displays digital value.
The value corresponding to the
100% on the graph
Resets the amplitude to the
100% of the input range.
Select a channel to display.
(Selectable from the channels
that are selected on the chan-
nel select palette.)
Further Info
Displays, in the left of the window, the information shown below.
Recording mode
The NORMAL tab becomes
active in the recording mode.
Information such as the record-
ing media, data transfer desti-
nation, signal conditioner sta-
tus, trigger settings is dis-
played.
Adjusts the display amplitude.
Displays the unit.
(When Change Unit is used to change
the unit, the changed unit is displayed.)
Reproduction mode
Explanations of Menus
The PLAY tab becomes active
in the reproduction mode. The
files recorded in the device
specified for reproducing are
listed. The currently opened
file is shown in boldface type.
Above the list, the signal con-
ditioner status at recording is
displayed.
3-37