Teac GX-1 Instruction Manual page 10

Sampling Frequency and Monitoring
Waveform Manual start recording
Level trigger recording
Reproducing
FFT Manual start recording
Level trigger recording
Reproducing
Bar graph Manual start recording
Level trigger recording
Reproducing
* : When no expansion unit is added, up to 8 channels are displayable. When one expansion
unit is added, up to 6 channels are displayable. When two or three expansion units are
added, up to 4 channels are displayable.
Sampling Frequency vs. Recording Time
Media (recording
capacity)
Memory (256 MB)
AIT (25 GB)
MO (1.3 GB)
PC card
Media on PC
Sampling frequency
200 kHz 100 kHz
OK OK
—
— OK
—
—
—
—
—
—
Sampling frequency x number of
channels (at maximum)
3,200 k (e.g., 200 k x 16 channels)
1,500 k (e.g., 50 k x 30 channels)
200 k (e.g., 20 k x 10 channels)
50 k (e.g., 5 k x 10 channels)
1,500 k (e.g., 50 k x 30 channels)
(Up to 32 channels)
≤ 20 kHz
50 kHz
OK OK
∆
OK OK
OK OK
— OK* OK
∆
— OK
— —
— OK OK
— OK OK
— —
∆ : Monitoring not supported
(Up to 32 channels)
Recording time (at maximum
transmission rate)
Approx. 40 sec.
Approx. 138 min. max.
Approx. 50 min. max.
Depends on the card capacity
Depends on the type of media
Introduction
—
—
1-5