Huawei AR3200 Series Configuration Manual page 87

Enterprise routers

Hide thumbs Also See for AR3200 Series:

Table of Contents

Huawei AR3200 Series Enterprise Routers

Configuration Guide - Device Management

Auto-Config Process

Figure 5-1

Issue 03 (2011-11-27)

NOTE

l When configuring the intermediate file, enter the MAC address and ESN, or either of them. The

configuration file is mandatory, and the version file and patch file are optional. The three files can be

configured in any sequence.

l A MAC address (or an ESN), a system software name, patch file name, and configuration file name

are separated by semicolons. A MAC address is in xxxx-xxxx-xxxx-xxxx or xx-xx-xx-xx format. The

file name is case insensitive and contains only letters, digits, and underscores.

l The system software name and version information must be available in the intermediate file, and

version information in the system software name must be the same as that in the intermediate file.

Version information must be contained in the system software.

shows the Auto-Config process.

Huawei Proprietary and Confidential

5 Auto-Config

Table of Contents