Outputting Logs To The Terminal - Huawei AR3200 Series Configuration Manual

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
Procedure
Step 1 Configure the logs to be output through the channel.
1.
2.
Step 2 Configure the channel through which logs are output to the console.
1.
2.
Step 3 Enable terminal display.
1.
2.
----End

2.3.9 Outputting Logs to the Terminal

By outputting logs to the terminal, you can view the operating status of the device on the terminal.
Procedure
Step 1 Configure the logs to be output through the channel.
1.
2.
Issue 03 (2011-11-27)
Do as follows on the router configured with the information center, run:
system-view
The system view is displayed.
Run:
info-center source { module-name | default }
channel-name } [ log { state { off | on } | level severity }
Logs are added to the information channel.
Logs can be output only after the information center is enabled.
Run:
info-center console channel { channel-number | channel-name }
The channel through which logs are output to the Console is configured.
Run:
quit
Return to the user view.
Do as follows on the router configured with the information center, run:
terminal monitor
Terminal display is enabled.
Run:
terminal logging
Displaying logs on the terminal is enabled.
Run:
system-view
The system view is displayed.
Run:
info-center source { module-name | default } channel { channel-number | channel-
name } [ log { state { off | on } | level severity }
Logs are added to the information channel.
Logs can be output only after the information center is enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Information Center Configuration
channel { channel-number |
*
]
*
]
19