Huawei AR3200 Series Configuration Manual page 92

Enterprise routers

Hide thumbs Also See for AR3200 Series:

Table of Contents

Huawei AR3200 Series Enterprise Routers

Configuration Guide - Device Management

Figure 5-2 Auto-Config application

Pre-configuration Tasks

Before deploying routers, complete the following task:

Data Preparation

To deploy routers, you need the following data.

Issue 03 (2011-11-27)

NOTE

Only Layer 3 Ethernet interfaces on the main control board support Auto-Config.

If the received DHCP Reply packet contains Option 43, the auto-configuration server (ACS) is used for

deployment.

GE0/0/1

LAN

CPE

Ensuring that physical links between routers and the DHCP server and FTP/TFTP server

work properly

Data

Information about the interface that connects an AR3200 to the DHCP server

Address pool of the DHCP server

IP address range and mask of the DHCP server

Egress gateway of routers

Option parameters of the DHCP server

Huawei Proprietary and Confidential

DNS Server

IP network

DHCP Relay

ACS Server

5 Auto-Config

FTP/TFTP Server

DHCP Server

Table of Contents