Huawei AR3200 Series Configuration Manual page 100

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
-----------------------------------------------------------------------------
Five minutes after the router obtains the IP address, run the display autoconfig-status command
to check whether correct version files, patch files, and configuration files have been downloaded
and check the running status of Auto-Config.
<AR3200> display autoconfig-status
Running: Yes
Can deploy configurations with a USB disk:
No
Stop
Reason : --
Suspend: Yes
Reason : The unknown reason cause getting
fil
The status of DHCP phase:
Operation result: Successful
Failed reason
The status of setting ACS phase:
URL
User name
Password
Operation result: --
Failed reason
The status of getting middle file phase:
File name
Operation result: --
Failed reason
The status of getting system software phase:
File name
Operation result: Suspend
Failed reason
The status of getting patch file phase:
File name
Operation result: --
Failed reason
The status of getting configuration file phase:
File name
Operation result: --
Failed reason
The status of activating configuration phase:
Remained time
Operation result: --
Failed reason
----End
Configuration Files
Configuration file of the DHCP server
#
dhcp enable
#
ip pool auto-config
gateway-list 192.168.2.6
network 192.168.2.0 mask 255.255.255.0
Issue 03 (2011-11-27)
192.168.2.1 192.168.2.254
: No
: --
: --
: --
: --
: --
: --
: --
: auto_V200R002C00B001.cc
: The unknown reason cause getting file from file server failed
: auto_V200R002C00B002.pat
: --
: auto_V200R002C00B002.cfg
: --
: --
: --
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
253 1 252
5 Auto-Config
0 0 0
92