Huawei AR3200 Series Configuration Manual page 98

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
Figure 5-3 Networking diagram for configuring the Auto-Config function
HostA
HostB
HostC
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Issue 03 (2011-11-27)
Router
Configure the DHCP server so that a router can obtain IP addresses and option parameters.
Configure an intermediate file.
Configure the IP address of the FTP server.
Save the intermediate file, version file, patch file, and configuration file to the working
directory on the FTP server.
NOTE
This example describes how to configure the Auto-Config function on an AR3200. Option 67 is specified
to carry the configuration file when the DHCP server is configured.
GE0/0/1 used to connect the AR3200 to the DHCP server
DHCP server information:
– Downlink interface Eth1/0/0 connected to the router
– IP address: 192.168.2.6/24
– Address pool: 192.168.2.0/24
– Option 67 (configuration file): auto_V200R002C00B002.cfg
– Option 141 (FTP user name): user
– Option 142 (FTP password): huawei
– Option 143 (FTP server address): 192.168.1.6
– Option 145 (non-configuration file):
vrpfile=auto_V200R002C00B001.cc;vrpver=V200R002C00B001;patchfile=auto_V2
00R002C00B002.pat;
Egress gateway's IP address 192.168.2.6 and MAC address 0018-82C5-AA89
FTP server's IP address: 192.168.1.6/24
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Eth1/0/0
192.168.2.6/24
GE0/0/1
DHCP Server
5 Auto-Config
Eth1/0/0
192.168.1.6/24
Eth1/0/0
FTP Server
90