Huawei AR3200 Series Configuration Manual page 94

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
dhcp enable
DHCP is enabled.
Step 3 Run:
interface interface-type interface-number
The interface view is displayed.
Step 4 Run:
ip address ip address { mask | mask-length }
The IP address is configured for the interface.
Step 5 Run:
dhcp select global
The interface is configured to use a global address pool. Users going online through this interface
can obtain IP addresses from the global address pool.
Step 6 Run:
quit
Return to the system view.
Step 7 Run:
ip pool ip-pool-name
The global address pool view is displayed.
By default, no global address pool exists on an AR3200.
Step 8 Run:
network ip-address [ mask { mask | mask-length } ]
The range of IP addresses that can be dynamically allocated is configured.
Step 9 Run:
gateway-list ip-address &<1-8>
The IP address of the egress gateway is configured for the DHCP client.
Step 10 Run:
option code { ascii ascii-string | hex hex-string | ip-address ip-address &<1-8> }
Option parameters of the DHCP server are configured.
If Option 67 is not configured, the process of obtaining the intermediate file is started.
Issue 03 (2011-11-27) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Auto-Config
86