Deploying Unconfigured Routers; Establishing The Configuration Task - Huawei AR3200 Series Configuration Manual

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
Option
Option 146
Option 147
Option 150

5.3 Deploying Unconfigured Routers

This section describes how to deploy unconfigured Routers.

5.3.1 Establishing the Configuration Task

Before deploying routers, familiarize yourself with the applicable environment, complete the
pre-configuration tasks, and obtain the data required for the configuration. This will help you
complete the configuration task quickly and accurately.
Applicable Environment
As shown in
properly, and there are reachable routes between the DHCP relay agent and servers. The
intermediate file, version file, and configuration file are stored on the FTP/TFTP server. After
the DHCP server and FTP/TFTP server are configured, routers can be configured by using Auto-
Config.
Issue 03 (2011-11-27)
Description
Operation information in the following format:
opervalue=OPERATEVALUE;delaytime=DELAYTIME;
l opervalue=0: indicates that no file will be deleted from the file system
when the space is insufficient. opervalue=1: indicates that version
files will be deleted from the file system when the space is insufficient.
By default, no file will be deleted from the file system when the space
is insufficient.
l delaytime: specifies the delay in restarting a device after a
configuration file is downloaded to the device, in seconds. By default,
the delay is 0 seconds.
NOTE
The maximum delay in restarting a device is 1 day. If the configured delay is longer
than 1 day, the actual delay is 1 day.
Authentication information. Option 147 is optional. If Option 147 is
required, it must be configured as AutoConfig.
IP address of a TFTP server.
NOTE
You can use the following methods to configure an FTP or TFTP server:
l
To configure a TFTP server, configure Options 6, 15, and 66 and obtain a TFTP server address from
a DNS server.
l To configure a TFTP server, configure Option 150 and obtain the TFTP server address.
l To configure an FTP server, configure Options 141, 142, and 143 and obtain the TFTP user name,
FTP password, and FTP server address.
Figure 5-2, the physical link between the router and DHCP relay agent functions
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Auto-Config
83