Establishing The Configuration Task; Resetting The Lpu; Checking The Configuration - Huawei AR3200 Series Configuration Manual

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management

4.6.1 Establishing the Configuration Task

Before resetting an LPU, familiarize yourself with the applicable environment, complete the
pre-configuration tasks, and obtain the required data. This will help you complete the
configuration task quickly and accurately.
Applicable Environment
When the LPU fails to be upgraded or fails to work normally, you need to reset the LPU.
Pre-configuration Tasks
Powering on the router
Data Preparation
To reset the LPU, you need the following data.
No.
1

4.6.2 Resetting the LPU

When an LPU fails to be upgraded or fails to work normally, you need to reset the LPU.
Context
When the LPU works abnormally, try to find and remove the fault rather than resetting the LPU
directly to avoid service interruption.
Procedure
Step 1 Run:
reset slot slot-id
The LPU in the specified slot is reset.
----End

4.6.3 Checking the Configuration

After an LPU is reset, you can check the LPU status and resetting cause.
Context
Resetting the LPU is complete.
Issue 03 (2011-11-27)
Data
Slot number of the LPU to be reset
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Management
75