Displaying Diagnostic Information; Displaying Health Status; Checking Interface Card Work Mode - Huawei AR3200 Series Configuration Manual

Huawei AR3200 Series Enterprise Routers
Configuration Guide - Device Management
If the brief parameter is specified, the electronic label of an optical module is not displayed.
Step 2 Run:
display elabel backplane
Electronic labels of the backplane are displayed.
----End

1.2.10 Displaying Diagnostic Information

Use the display diagnostic-information command to collect running information of all
modules, including clocks, versions, current configuration file, saved configuration files,
physical and protocol information about an interface, statistics on the transmitted and received
packets, memory usage, and system logs. Use this command for locating faults instead of running
multiple display commands.
Procedure
l
----End

1.2.11 Displaying Health Status

Use the display health command to view health status information, including CPU usage,
memory usage, power supply status, fan status, and temperature.
Procedure
l
----End

1.2.12 Checking Interface Card Work Mode

The interface card work mode can be displayed using the display workmode command.
Context
Only the work mode of the interface cards with configurable work modes can be displayed.
Issue 03 (2011-11-27)
Run:
display diagnostic-information
Diagnostic information is displayed.
CAUTION
When this command is being executed, system performance will be degraded, for example,
the CPU usage increases. Therefore, do not use this command when the system is operating
normally.
Run:
display health
Health status is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Displaying the Device Status
6