RM-36
RF Troubleshooting and Manual Tuning Guide
2. From the Testing menu, choose WCDMA and Rx Control.
3. In the Rx Control window:
• From the AGC Mode pane, select Algorithm.
• Set Channel to 10700.
• Set AFC Algorithm to OFF (Default = OFF).
Next action
When settings are ready, click Start to activate them.
If settings are changed later on (for example, you give a new channel number), you will need to click Stop and
Start again.
Note:
Clicking Stop also disables Tx Control if that was active!
WCDMA RSSI measurement
Before you begin
WCDMA Rx must be activated before RSSI can be measured. See
measurement (Page
7–10).
Issue 1
Figure 69 Activating Rx Control window in Phoenix
Figure 70 Rx Control window
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
WCDMA Rx chain activation for manual
Nokia Customer Care
Page 7–11