Updating Phoenix Installation - Nokia 6680 RM-36 Service Manual

RM-36
Nokia Customer Care Service Software Instructions
8. To end installation, click Finish .
Figure 6 InstallShield Wizard Complete
Phoenix is now ready for use.
Next action
After the installation, Phoenix service software can be used after:
• installing phone model specific data package for Phoenix
• configuring users and connections
FPS-8* and FPS-10 flash prommers can be used after updating their Flash Update Package files.

Updating Phoenix installation

If you already have the Phoenix service software installed on your computer, you need to update the software
when new versions are released.
When you update Phoenix (for example, a14_2004_16_4_47 to a15_2004_24_7_55), the update will take place
automatically without uninstallation.
Always use the latest available versions of both Phoenix and the phone-specific data package. Instructions can
be found in the phone model specific Technical Bulletins and phone data package readme.txt files (shown during
installation).
To update Phoenix, you need to follow the same steps as when installing it for the first time:
• Download the installation package to your computer hard disk.
• Close all other programs.
• Run the application file (for example, phoenix_service_sw_2004_39_x_xx.exe).
A new Phoenix version will be installed and driver versions will be checked and updated.
If you try to update the Phoenix with the same version you already have (for example, a15_2004_24_7_55
to a15_2004_24_7_55) you are asked if you want to uninstall the existing version of Phoenix. In this case you
can choose between a total uninstallation and repair just like when you choose to uninstall Phoenix service
software from the Windows Control panel.
Page 3–8 Company Confidential Issue 1
Copyright ©2005 Nokia. All Rights Reserved.